TGA-DSC：同一試料の TGA (熱重量測定) と DSC (示差走査熱量測定) の同時測定 を実行する時は、DSC プローブを天秤に装着します。
TGA と DSC 同時測定 - STA - は、別々の測定より多くの情報を提供します。
セタラムの製品には、ユニークな2400°C までの高温システムや対称型天秤と3D-Dimension DSC を結合した革新的システムが含まれています。

高機能モジュラータイプDTA &DTA/ DSC同時熱分析装置 (室温 / 2400°C)

SETSYS Evolution TGA-DTA/DSC

単一加熱炉で分析市場最大の温度範囲(室温～ 2400°C).
モジュラー方式：交換可能DTA, DSC, TGA 及び TMA モジュールは、同じ基本構造で使用可能です。
高いレベルにある高精密天秤は、二つの測定重量が可能です：35 g 又は 100 g
TGA-DTA 同時測定 2400°C まで、 TGA-DSC 同時測定 1600°C まで
温度制御キャピラリー或いは1024 amu （重く、凝集しやすい分子）までの質量分析に有効な超音波システム（超音波膨張によるサンプリング）によるMS、FTIR、GC 等のガス分析装置への接続

詳細を見る

An innovative line of Thermal Analyzers (-120 / 830°C) with 3D-Inside technology: DSC, High Pressure DSC, Robot DSC, TG-DSC-coupling to gas analyzer

SENSYS evo TG-DSC

The SENSYS evo TG-DSC offers the most precise DSC sensor together with a truly symmetrical microbalance to give YOU a combined TG-DSC system with totally unmatched performance. Additionally both measurement sensors are totally independent , so can be operated independently or simultaneously without compromising performance.

詳細を見る

TGA, DTA, DSC and Simultaneous TGA-DTA, TGA-DSC from ambient to 1600°C

LABSYS evo

- Coupling to gas analysis (FTIR, MS)
- New 3D high-precision Cp sensor
- Cp measurement within 2 % up to 1600 °C
- Calisto software

LABSYS evo offers TGA with simultaneous DTA or DSC and Cp measurement within the temperature range of ambient to 1 600 °C. The LABSYS evo features a NEW high performance top loading balance and a unique 3D high-precision (Calvet type) Cp rod. Thanks to its unique ergonomic design and market leading Calisto software the LABSYS evo offers you the most easy-to-use Thermal Analysis system with uncompromised performance.

詳細を見る

多機能＆高温TGA-DSC/DTA同時測定装置(室温～2000℃)

96 Line TGA - DTA / DSC

96 LINEは、モジュラータイプの高温(室温～2000℃)、多機能（落体式熱量計、熱量計、DTA、DSC、TGA、TMA）熱分析装置です。
大容量試料には、多くの利点があり、次のような可能性を提供します：
- バルク材で、量の多い分離できない試料の分析（例えば、機械部品の腐蝕解析等）
- 混合試料の解析（コンクリートコア試料等）
- TGAによる微量重量変化の検出（鋼板の腐蝕解析等）

詳細を見る

High Performance Symmetrical TGA System (ambient / 1750°C)

TAG

The TAG Analyzers use a symmetrical balance mounted over two matched furnaces to allow for buoyancy free measurements. This allows, primarily, for almost zero baseline dirft and therefore for high precision and long term experimental studies. An example is the long term oxidation of metals and specialist materials.

Additionally the furnaces are easily adapted to take highly corrosive gaseous mixtures, and a fully automated gas panel allows for mixing and control for precise simulation of even the most demanding environments.

詳細を見る

登録

for full access to application
library, spare parts catalog and newletters

お問合せ

私たちのニュース

NEW PRODUCT: PCTPro E&E
	A fully automated Sievert instrument for measuring Gas (CO₂, CH₄, C₂H₆, N₂) Sorption properties of materials. See More

CO2 CAPTURE & SEQUESTRATION

Find out our instrumentation is used to study CO₂ Capture and Sequestration

See More

OXIDATION BY CHEMILUMINESCENCE
	NEW distribution agreement of ACL's Chemiluminescence systems for the analysis of oxidative reactions See more

All news

会議・展示会

November 03, 2010 - November 03, 2010
October 18, 2010 - October 22, 2010
MATERIAUX 2010
Nantes, FRANCE

Co-organized by more twenty learned societies, these events have been meeting opportunities between the national actors in the various fields of Materials Science.

For this 3rd edition, 14 symposiums are proposed whose:
- Civil engineering and Futur Habitat
- Energy Storage & Conversion
- Materials for Transport
- Materials & Environment
- Nanochemistry, Nanomatérials, Nanostructures
- Materials and Health Safety
- Thermodynamics and Materials for High Temperatures
- Mechanical properties and Spoiling
- Material stakes for the nuclear reactor (generation IV)
September 05, 2010 - September 08, 2010
MOF'S Conference
Marseille, FRANCE

This conference will follow the very successful 2008 conference that was held in Augsburg. The conference 2010 will be organized in Marseille at a central location overlooking the old port. The aims of MOF2010 are to address all questions concerning the community working with Metal Organic Frameworks, Metal Coordination Compounds and related materials. The spectrum of topics to be treated range from synthesis and characterization of new materials to properties of materials towards potential applications in biology/medicine, catalysis, magnetism, luminescence and sorption. Both experimental and theoretical aspects will be dealt with, along with key questions pertaining to potential industrial applications of this fascinating family of materials.
September 05, 2010 - September 10, 2010
SCTE 2010
Annecy, FRANCE

17th International Conference on Solid Compounds of Transition Elements

SCTE 2010 will be held in Annecy September, 5-10, 2010. The conference will be jointly organized by Institut Néel, CNRS-Université Joseph Fourier, Grenoble and Institut de Chimie de la Matière Condensée de Bordeaux, CNRS- Université Bordeaux 1, Bordeaux.