the highlights

An innovative line of Thermal Analyzers (-120 / 830°C) with 3D-Inside technology: DSC, High Pressure DSC, Robot DSC, TG – DSC – coupling to gas analyzer


  • Incomparable precision: the unique 3D sensor totally surrounds your sample and reference crucibles so that the entire energy of any transformation is monitored thereby giving you an unequalled accuracy of measurement.
  • Ease of operation: dedicated market leading CALISTO software that is not only intuitive but powerful enough to perform every typical experiments and data treatment.
  • Parameter Independent Calibration: because of the 3D transducer the calibration of SENSYS evo is independent of:
    – mass and form (powder, fibre, liquid, etc.) of the sample,
    – contact between the sample and the transducer,
    – crucible type,
    – sweeping gas (inert, oxidizing, reducing, wet, pressure) and flow rate.
  • DSC measurement under High Pressure: Two models of sealed “High Pressure”
    Crucibles are available in which only the sample and not the sensor is pressurized, thus allowing for the calibration, baseline and sensitivity to remain unchanged.
  • Large sample volumes: The working volumes of the crucibles (up to 250 μl) are highly suited to the study of heterogeneous samples, or low-energy phase transitions. They are intended for analyses where the pressure generated by the sample remains low. Crucibles are available in alumina, aluminium, rhodiated platinum.


2D plate-shaped or cylindrical 3D Calvet sensor?


Temperature range Ambient to 830 °C
With cooling accessory -120 °C to 200 °C (Liquid Nitrogen Accessory)
Programmable temperature scanning rate(heating and cooling) 0.01 to 30 °C.min-1
Cooling time 17 min (from 50 °C to -100 °C) with Liquid Nitrogen Accessory
RMS Noise 0.2 μW
Resolution 0.35 μW / 0.035 μW
Autosampler 48 samples even under pressure
Gases 3 carrier gases(MFC from 4 to 200 ml/min) + 1 auxiliary or reactive gas (MFC from 0.3 to 16 ml/min)
Crucibles 120 μl, 160 μl, 320 μl – aluminium, incoloy, gold plated incoloy, graphite,alumina, platinum, etc.
Pressure (non controlled) High Pressure Crucible -(up to 500 bars / 7250 psi at 600 °C)
Pressure (measured & controlled) High Pressure Crucible -(up to 400 bars / 5800 psi at 600 °C)
Weight 45 kg (99 lbs)
Dimensions (Height / Width / Depth) 45 / 53 / 58 cm (17.7 / 20.9 / 22.8 in)
Power requirements 230 V – 50/60 Hz


From routine QC to the determination of a complex formulation within R&D, a robotic autosampler is the ideal solution when high sample throughput is essential.

The SENSYS evo DSC Robot offers the possibility of performing unattended analysis of up to 48 samples.

The SENSYS evo DSC robot is the only automated DSC capable of working with high pressure Incoloy crucibles.



With its high precision and wide temperature range (-120 to 830 °C) the
SENSYS evo DSC has a wide range of applications, especially in the fields of thermodynamics (Specific Heat Capacity Cp precision within +/-1 %), pharmaceuticals (phase diagram, polymorphism, purity, thermal stability), safety of chemical process(transition, decomposition under high pressure), energy(catalysis, hydrogen storage, hydrogen adsorption), polymers (glass transition, measurement under pressure), etc.

View the application notes in your field, available for download, by visiting Application Library area
We have also included a powerful search engine that will enable you to find the most applicable data.




Application notes

This is an extract of our documentation, please register to have access to all documentation

Differential Scanning Calorimetry (DSC)/ Differential Thermal Analysis (DTA) : SENSYS evo DSC par SETARAM