SETSYS Evolution TMA

the highlights

高機能モジュラータイプ熱機械特性分析装置 TMA (室温 / 2400°C)

 

The HIGHLIGHTS

SETSYS Evolution is the standard for high performance TG, TG-DSC and TG-DTA application.  It is based on a complete modular thermal analysis platform for
– TGA, DTA and DSC
– Simultaneous TGA/DTA and TGA/DSC
– Dilatometry/TMA
The key to the SETSYS TMA is the vertical design of its displacement transducer.

NEW PARTS AND OPTIONS
High temperature bending for TMA
A graphite-based, high temperature, 3-point bending accessory is available for work up to 2400°C+.

Protected thermocouple
An alumina sleeved protected thermocouple was designed to prevent corrosion/damage from the gases evolved from the sample. Various thermocouples types are available up to 1750°C.

specifications
Setsys Evolution DTA DSC TGA TMA
天秤 35g-100g
モジュール測定温度範囲(C°) 室温~2400 室温~1600 室温~2400 室温~2400
るつぼ容量(µl) 30/100 80/100 50/3000 n/a
最大試料寸法 (mm) n/a n/a L:20 Ø 14 L:20 Ø 10
感度 0.4 µW 1 µW 0.002 µg / 0.02 µg 0.2 nm
RMSノイズ 20 µW 20 µW 0.03 µg/0.3 µg 5 nm
単位当りRMSノイズ 0.20 µW/µl 0.20 µW/µl 0.02 µg/0.2 µg/ml 0.25.10-6
測定範囲 n/a n/a ±200 mg / ±2 g ±2 mm
features

Furnace
The SETSYS Evolution comes equipped with a robust and high performance graphite furnace, offering high scanning rates ( up to 100 °C/min across the entire temperature range) and fast turn around between experiments.
A SINGLE furnace covers all applications from ambient to 2400 °C . The maximum temperature operation is adjusted by simply and rapidly changing the control thermocouple (for 1000, 16000, 1750 or 2400 °C).
SETSYS Evolution provides also primary and secondary vacuum capabilities.
Atmospheres
A high-performance gas control panel equipped with MFC (Mass Flow Controllers) ensures a precise control of the atmosphere and of the gas mixtures.
Many possibilities are offered for the control of the atmosphere.
Standard SETSYS TGA Evolution configuration allow for any type of gas up to 1750 °C. Above 1750 °C, the furnace remains the same  and a few accessories are replaced to allow operation up to 2400 °C.
Gas include H2, CO2, NH3 up to 100% concentration. Optional accessories are available for:
– ensuring hydrogen safety
– working under corrosive gas (allows evaluation of materials under 100% corrosive gas)

applications

For measuring variations in size of solids or powders, the SETSYS TMA is used for characterizing polymers and compounds (softening, glass transition, degradation, reticulation) under varied stresses, for studying films and fibers, for sintering ceramics, for studying the thermal behavior of alloys and more generally for measuring coefficients of expansion.

documentation


Brochures
Posters
Application notes

This is an extract of our documentation, please register to have access to all documentation



videos
熱分析 : SETSYS Evolution TMA par SETARAM